Gear Machining RFQ: Define the Teeth Before Comparing Quotes

0
Meshing metal spur gears and mounting hubs, reference photograph for a gear machining RFQ

A gear machining RFQ that gives only outside diameter and tooth count leaves essential information unresolved. The supplier needs a defined tooth system, mounting geometry and acceptance basis before its quote can describe the same part you intend to buy.

Reference gear photograph by Bachelot Pierre J-P, Wikimedia Commons, CC BY-SA 3.0. No editorial changes; display-size versions retain this image license. This is not an LXCET-manufactured part or customer delivery.

Identify the gear geometry explicitly

For a metric gear, state module, tooth count and pressure angle rather than asking the supplier to infer them from an image. For a helical gear, identify the normal or transverse system, helix angle and hand. KHK’s ABC’s of Gears basic guide distinguishes these systems and their dimensional relationships. Equal-looking module numbers do not remove the need to identify the system.

Provide the mating gear details and relevant assembly constraints for engineering review. A sample can help investigate an existing part, but a worn sample should not silently become the manufacturing specification. Agree who approves the reconstructed drawing before production.

Make the quotation scope comparable

RFQ field What to state What remains unclear without it
Tooth definition Gear type, tooth system, count and specified modifications Which tooth geometry is being quoted
Mounting features Bore, shaft, keyway, faces and datum relationships How the gear locates in the assembly
Material and treatment Grade, condition and required treatment specification Which manufacturing stages are included
Acceptance Named standard/edition, characteristics and report scope What evidence releases the delivery

Keep gear accuracy separate from bore tolerance

A close bore tolerance does not define the acceptance of the teeth. Ask the supplier to identify which tooth characteristics it will measure, the applicable acceptance criteria and the report format. Do not specify an unexplained accuracy number: name the standard and edition, and identify what the drawing requires.

If backlash matters, describe the mating arrangement, center distance and required operating conditions. Ask the responsible designer to approve the requirement. A single outside-diameter measurement is not a substitute for checking the specified tooth geometry or the assembled mesh.

  • Released drawing and native model where useful.
  • Tooth system, material and complete mounting features.
  • Treatment, final finishing and inspection stages included in the quote.
  • Specified accuracy standard and required report characteristics.
  • Mating-part information, sample approval and change authorization.

Use the machining RFQ checklist to compare scope and the material certificate checklist for traceability. The heat treatment distortion guide explains why treatment and final finishing need an agreed sequence. Send a complete gear drawing to tonyzhou@lxcet.com for an order-specific capability review. Gear cutting methods, inspection resources and achievable quality must be confirmed for the actual design.

Leave a Reply

Your email address will not be published. Required fields are marked *