Blog
CNC Machining Tolerances: Specify Critical Features Before Quoting
A tight bore diameter will not fix a hole pattern located from the wrong datum. Before requesting a quote, separate the dimensions that control assembly from those that only describe the part. CNC machining tolerances should follow those functions, with an agreed way to verify the finished component.
Which CNC machining tolerances need individual callouts?
Start with the mating part and the failure you need to prevent. A bearing seat, sealing face and clearance pocket have different jobs. Do not apply the tightest requirement to all three merely to simplify the drawing.
| Feature | Requirement to resolve | Acceptance question |
|---|---|---|
| Bearing or bushing seat | Size limits, fit, relevant form and relationship to the assembly datums. | Does the selected fit suit the component and operating conditions? |
| Mounting-hole pattern | Location and orientation relative to the functional mounting references. | Can the mating assembly locate and fasten without forcing the parts? |
| Seal or thermal-contact face | Required form, surface texture and condition after finishing. | Which surface characteristics determine the interface performance? |
| Clearance pocket or outside profile | Clearance to adjacent components, minimum wall and envelope limits. | What happens at the limiting sizes, including the mating-part variation? |
For machined fixture components, identify the holes that locate the work and the faces that support it. Review their relationships before tightening unrelated profile dimensions.
A general drawing tolerance can cover the remaining dimensions, but its value and governing standard still need to be stated and reviewed. No single milling or turning tolerance is suitable for every material, size and geometry.
Select the fit before choosing a familiar tolerance band
For bearing interfaces, use the component manufacturer’s guidance for the actual application. NHBB’s shaft and housing fit guidance identifies load, temperature, running accuracy, materials and bearing type as selection factors. A fit copied from another assembly can therefore be inappropriate even when the nominal diameter matches.
State the drawing convention and edition. ASME Y14.5 defines the language and interpretation of GD&T; it is not a universal machining-capability table. Size limits alone do not describe every required relationship between features.
A correct bearing-seat diameter does not establish clearance at the shaft shoulder. Review the shaft shoulder radius and bearing-clearance guide when specifying the transition profile, supporting face and trial-assembly checks.
Ask what changes in the process and inspection plan
If a callout drives the quote, ask the supplier to identify the affected operation and measurement requirement. Review the feature’s tool access, support during machining, finishing sequence and acceptance method. Compare a proposed alternative against the same functional requirement before approving a drawing revision.
There is no reliable price multiplier for a tolerance number alone. Compare written quotations for the same drawing revision, material, quantity, finish and inspection scope. Request any alternative tolerance as a separate, clearly identified option; do not allow an unapproved relaxation to become the production specification.
For flexible geometry, review thin-wall machining and distortion. Where anodizing is specified, define whether the accepted dimensions apply before or after treatment; the anodizing dimensional-change guide covers the fit review.
A pocket can meet its width limits and still block a mating insert at an internal corner. The CNC pocket corner-radius guide covers corner clearance, permitted relief regions and checks that confirm the insert reaches its locating face.
Drawing-release checklist
- Identify the mating components, functional datums and critical interfaces.
- State the general tolerances and exceptions without conflicting notes.
- Check the assembly at the permitted limits, including the mating parts.
- Define the accepted condition after any coating, heat treatment or assembly step.
- Agree measurement access, method and required inspection records.
- Record approved changes in a controlled drawing revision before production.
Use the RFQ checklist to keep quotation scope consistent and the inspection-report checklist to define acceptance evidence. Send the controlled drawing, model, mating requirements and quantity to tonyzhou@lxcet.com for a project-specific review. Agree the manufacturing scope and inspection evidence in the quotation.
